Archive : Tag

The Pros and Cons of Foam on Beer (FOBs)

POSTED ON November 24th  - POSTED IN Blog

The FOB detects an empty keg and stops beer flow, which eliminates the foam created by an empty keg. It also eliminates the need to refill lines with beer and purge air from the system. With an FOB installed on a beer line, when a keg hits empty and the bartender taps the new keg, the tap will immediately pour beer. 

Are You Considering Flow Meters For Your Draft Beer System?

POSTED ON October 26th  - POSTED IN Blog

Over pouring beer can lead to sale losses ranging from 5% to 50%. The average amount is 23%, or nearly one out of four beers. These losses can occur for a variety of reasons. Staff may sell drinks without recording them in the register. They may charge regular prices for drinks, but ring them in as lower-priced specials and pocket a large tip. Staff may also reverse and void transactions.

Why Draft Beer Line Cleanings Are So Important

POSTED ON October 18th  - POSTED IN Blog

Many bar owners don’t want their draft beer system cleaned as often as the Brewers Association recommends because of the product loss caused by cleaning. However, experienced bar owners know how profitable a good, fresh draft beer can be. The truth is, regularly cleaning draft beer lines is an essential part of running a successful bar business. 

If you serve draft beer, consider the cleaning process as important as cleaning pots and pans in the kitchen. Customers will notice the effects of dirty beer lines in the taste and quality of the beer. Word will spread, and you could find business going downhill. Better to lose a little bit of beer during the cleaning process, than to drive away customers with poor-tasting beer.

Cleaning the draft beer system involves draining the draft beer lines to pass chemicals and water through them and eliminate funky tasting beer, beer stone, and molds. The FOBs, faucets, shanks and all other parts of a draft beer system need cleaning as well. 

If you don’t clean your full system, the draft beer won’t be served as fresh as the brewmaster intended it to be served. You WILL lose sales if you are serving bad-tasting or skunky draft beer. Most customers won’t realize that the draft beer quality is being negatively impacted by unclean beer lines and equipment. They’ll just decide that they don’t like the taste of your beer and won’t order another one. They might order a bottled beer that has a lower ROI on your bottom line, or just leave and not return.

Generally, all the beer that is in the lines during cleaning is wasted. The longer the beer line from the keg to the faucet, the more waste there will be. For this reason, we prefer to install through the wall draft beer systems instead of long draw systems. However, space constraints often prevent us from installing through the wall draft beer systems. 

If you have any questions about this and any other draft beer equipment, we’d love to hear from you! 

How To Clean The Coupler And Faucets

POSTED ON September 24th  - POSTED IN Blog

The key to a properly functioning draft beer system is routine maintenance. Cleaning the keg coupler and faucet is an important part of keeping your beer free of yeast and mold, since just a small amount could lead to serious problems for the entire system.

5 Questions to Consider When Choosing a Long Draw Beer System

POSTED ON August 16th  - POSTED IN Blog

If you’re searching for a new draft beer system for your restaurant, it’s important to take the time to research the different types of systems. If a long draw beer system is best for you, consider the following questions before scheduling installation.

Glacier Creates Draft Beer System for Venice West

POSTED ON August 2nd  - POSTED IN Blog

Glacier Design Systems recently completed the design and installation of a Direct Draw draft beer system for Venice West, a live blues music venue soon to open in Los Angeles, CA. The draft beer system has 14 taps and will help the venue serve customers for years to come.

The Three Types of Draft Beer Systems

POSTED ON July 28th  - POSTED IN Blog

Modern technology has led to the creation of three types of advanced draft beer systems: direct draw, air cooled, and glycol cooled. Whether you already own a bar and are looking to make an upgrade, or you’re considering becoming a bar owner, here’s what you need to know.

How to Choose a Beer System Service Provider

POSTED ON July 20th  - POSTED IN Uncategorized

Every restaurant and bar owner needs a properly functioning beer dispensing system and a beer system service provider they can rely on. When searching for a beer system service provider, it’s important to consider the following characteristics.